Handmade Custom Hulda Clark Zappers by the Zapper Man

Wherever I go, I'm on the lookout for cool plastic boxes, cases, toys, and enclosures to build my Hulda Clark Breadboard Circuits into. It's a fun hobby, and handmade custom zappers make great gifts. They are a unique gift made with love, and each one is truly one of a kind. Each year around the holidays I get out my supplies and start making custom zappers, and post a few for sale for those out there that would like to have a small piece of Frequency Art of their very own at home.

Hello Kitty Custom Hulda Clark Zapper

The Hello Kitty Zapper has two banana jacks mounted on the outside to easily attach the included banana to alligator leads and copper handles. On/Off toggle switch is found under the pink bow on top of Hello Kitty's head. Circuit output is Dr. Clark's original 30 kHz with 1/4 volt Positive Offset Square Wave. This was originally full of Hello Kitty erasers and a stapler. Cardboard pink heart insert fits inside lid, or remove it for the Mecha RoboKitty look. Case opens easily for battery change. A brand new 9 volt battery is included as well as a copy of the Zapper Basics set up manual to get you started. Click here for order information.

Hello Kitty Custom Hulda Clark Zapper

Click here for more information about the Hello Kitty Zapper.

Godzilla Custom Hulda Clark Zapper - SOLD OUT

The Godzilla Zapper is made from a strange Japanese Lie Detector toy. There used to be metal tabs down by his feet one would put fingers on and he would roar when the person lied. Crazy huh? It would have been cool, but it didn't really work so I took it apart and hand soldered a zapper circuit to fit inside. Godzilla's eyes light up when switch is turned on. Godzilla's circuit is Dr. Clark's original 30 kHz with 1/4 volt Positive Offset Square Wave. Alligator leads permanently come from each paw. Copper handles and 9 volt battery included. The Godzilla Zapper sold out fast. If you want a one of a kind handmade custom Hulda Clark zapper, be sure to order before it's gone. More available below:

Godzilla Custom Hulda Clark Zapper

Muffin Man Custom Hulda Clark Zapper

Custom Handmade Zapper built into a plastic muffin box. I like this guy. He kinda looks like a robot, pin cushion, or mushroom. Two banana jacks on each side of the On/Off switch to easily connect the included banana to alligator lead cables to the copper handles. Zapper circuit is Dr. Clark's original 30 kHz with 1/4 volt Positive Offset Square Wave. Box has a little latch to open for easy battery changes. A new 9 volt battery and a copy of the Zapper Basics set up manual is included. Click here for order information.

Handmade Muffin Man Custom Hulda Clark Zapper
Click here for more information about the Muffin Man Zapper.

80 Hz - 30,000 Hz Handmade Dial-A-Zap Hulda Clark Zapper - Hertz Meter Not Included

The Dial-A-Zap has a 1 Meg Ohm potentiometer and knob added to the Hulda Clark Breadboard Zapper Circuit so one can adjust the output frequency anywhere from about 80 Hz to 30,000 Hz with a turn of the knob. You will need a multimeter with Hz setting (not included - buy one at Radio Shack) to see the frequency output. Output bolts on the Dial-A-Zap are color coded. Blue for (-) ground and red for (+) positive output. Connect Hz meter to color coded output bolts to adjust frequency. Once you see the frequency you desire, disconnect meter. Connect the copper handles and you're ready to go.

This is a fun project to build yourself, so check out the Dial-A-Zap Tutorial. The Dial-A-Zap has an easy open battery door on the bottom and comes with a new 9 volt battery, two alligator leads, and a copy of the Zapper Basics set up manual.For those that want to use the Dial-A-Zap to experiment with the 1000 Hz setting as seen in Dr. Hulda Clark's "Prevention" book, be sure to buy a North Pole Speaker (sold separately) to make a homemade Food Zappicator, Toothbrush Zappicator, or Pet Zappicator. If you want to order the Dial-A-Zap below: Click here for order information.

Handmade Dial-A-Zap 80 Hz - 30 kHz Hulda Clark Zapper
Click here for more information on the Dial-A-Zap.

All Handmade Custom Hulda Clark Zappers come complete with copper handles, cable leads, a 9 volt battery, and a copy of Zapper Basics set up manual.

I have a blast looking for interesting plastic cases and boxes to contain my handmade Hulda Clark Zapper Breadboard Circuits. The breadboard in our kit has double stick tape on the bottom so it can be stuck to any smooth clean surface. Handmade custom Zappers make great gifts. It's fun to build your own! The Zapper Kit has all the parts required to build a 30 kHz or 1 kHz Zapper circuit including step by step instructions. Order the Zapper Kit below and make your own unique Hulda Clark Zapper!

Zapper Kit
Two Copper Pipe Handles
View Shopping Cart / Checkout

Already have electronic parts? Download PDF Instructions

NaturalHealthSupply.com

Directions to build the 1000 Hz Zappicator circuit

Containment Ideas, and the Zap Kit FAQ list

For individual electronic parts and more build ideas visit: PositiveOffset.com

Don't want to build your own? Check out the Dual Frequency Hulda Clark Zapper by Frequency Generation

Question or Concern About An Order Click Here For Customer Service

Order by Mail

Join us at facebook

The Hulda Clark Zapper is not licensed by the Food and Drug Administration for use in the cure, mitigation, treatment, or prevention of any disease in humans or animals. The Clark Zapper can only be sold as an experimental device. If you are pregnant or wearing a pacemaker, please do not experiment with a zapper. All information is for educational purposes only. Consult a licensed health professional before attempting any self health program. For more information on how to build and use the zapper, please read the books by Dr. Hulda Clark.

Website and Video ClarkZapper.net
Legal Disclaimer Privacy Policy